EasyManua.ls Logo

Siemens SITOP PSU8200 24 V/20 A - Page 58

Siemens SITOP PSU8200 24 V/20 A
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical data
6.2 Output
SITOP PSU8200/3800 3ph
58 Manual, 05.2018, C98130-A7638-A1-6-7629
6EP3446-8SB10-0AY0
(36 V/13 A)
6EP3446-8SB00-0AY0
(48 V/10 A)
6EP3447-8SB00-0AY0
(48 V/20 A)
Signaling Relay contact (NO contact,
contact rating (isolated):
60 V DC/0.3 A) for "36 V
O.K."
Relay contact (NO contact,
contact rating (isolated):
60 V DC/0.3 A) for "48 V
O.K."
Relay contact (NO contact,
contact rating (isolated):
60 V DC/0.3 A) for "48 V
O.K."
Response when switching
on/off
No overshoot of U
out
(soft
start)
No overshoot of U
out
(soft
start)
No overshoot of U
out
(soft
start)
Starting delay, max.
2.5 s
2.5 s
2 s
Voltage rise, typ.
150 ms
150 ms
150 ms
Rise time of the output
voltage, max.
500 ms 500 ms 500 ms
Rated current I
out rated
13 A
10 A
20 A
Current range
Remark
0 - 13 A
60 ... 70 °C derating:
approx. 2 % I
out rated
/K
0 - 10 A
60 ... 70 °C derating:
approx. 5 % I
out rated
/K
0 - 20 A
22 A to 45 °C
60 ... 70 °C derating:
approx. 4 % I
out rated
/K
Active power output, typ.
468 W
480 W
1020 W
Constant overload current/for
a short circuit when powering
up, typ.
14 A 11 A 28 A
Short-time overload current
for a short circuit in opera-
tion, typ.
39 A 30 A 60 A
Duration of the overload
capability for an overcurrent
condition caused by a short
circuit in operation.
Remark
25 ms
per 1 min
25 ms
per 1 min
25 ms
per 1 min
Can be connected in parallel
to increase the power rating
Remark
Yes
Switchable characteristic
curve with switch A (see
Figure 2-5
Operating display
and signaling (Page 15))
Yes
Switchable characteristic
curve with switch A (see
Figure 2-5
Operating display
and signaling (Page 15))
Yes
Switchable characteristic
curve with switch A (see
Figure 2-5
Operating display
and signaling (Page 15))
Number of devices that can
be connected in parallel to
increase the power rating,
units
2 2 2
Overload capability (Extra
Power)
19.5 A for 5 s/min 15 A for 5 s/min 30 A for 5 s/min
Output characteristic see Figure 6-4 Output char-
acteristic 6EP3446-8SB10-
0AY0 single operation
(Page 62)
see Figure 6-5 Output char-
acteristic 6EP3446-8SB00-
0AY0 single operation
(Page 62)
see Figure 6-10 Output
characteristic 6EP3447-
8SB00-0AY0 single opera-
tion (Page 64)

Table of Contents

Related product manuals