SITRANS F C MASSFLO
19
SFIDK.PS.028.R1.02
ENGLISH
5.4 Menu details
Basic settings menu
5. Commissioning
The decimal point for flowrate, totalizer 1 and totalizer 2 can be individually positioned.
• open the respective window.
• ensure that the cursor is positioned below the decimal point. Use the SELECT KEY .
• move the comma to the required position. Use the CHANGE KEY .
Units are changed by means of the CHANGE KEY with the cursor placed below the unit
selected. Select units (moving the cursor) by means of the SELECT KEY .
Totalizer 2 is not visible when batch is selected as digital output.
To Next Page
Loading...
