SITRANS F C MASSFLO
5
SFIDK.PS.028.R1.02
ENGLISH
2. Installation
Mount the adaptor on top of the sensor inter-
face, if not already mounted.
When fitting the multiple plug, please make
sure that it is correctly oriented (note the little
tap).
The adaptor can be oriented in 4 directions.
Tighten the 4 screws with a 4 mm Allen key to
secure the adaptor.
Mount the multiple plug in the adaptor and
tighten the glands on the plug to obtain opti-
mum sealing.
Note the wire colours when connecting the
MASS 6000. Refer to the diagram for electrical
wiring under "Electrical connection".
Installation of sensor
MASS 2100
(continued)
To Next Page
Loading...
