Siemens SITRANS F - Figure 3-1 New Communications Module Installation

F US Clamp-on Communications Module Kit Installation
SITRANS F US Clamp-on Communications Module
Hardware Installation Instructions, 03/2015, A5E32586525-AE
11
①
Flow Meter
④
Power Connector location
②
I/O Module cover, cover screw,
standoff
⑤
I/O Module
③
Flow Meter Cover Latch
⑥
I/O Module captive mounting screws
Figure 3-1 New Communications Module Installation
4. Remove the four mounting screws and standoffs ⑥ that secure the I/O Module ⑤ and
discard.
5. Install the new standoffs supplied in the mounting kit in the vacant positions.