A5E32106153 SITRANS Probe LR – QUICK START MANUAL Page EN-3
mmmmm
English
Power
• Maximum 30 V DC
• 4 to 20 mA
Approvals
• General CSA
US/C
, FM, CE, C-TICK
• Radio Europe (R&TTE), FCC, Industry Canada
• Hazardous Intrinsically Safe (Europe) ATEX II 1 G EEx ia IIC T4
(US/Canada) FM/CSA
1
: (barrier required)
Class I, Div. 1, Groups A, B, C, D
Class II, Div. 1, Groups E, F, G
Class III T4
(Australia) ANZEx Ex ia IIC T4
(Tamb = –40 to + 80 °C) IP67, IP68
(International) IECEx TSA 04.0020X Ex ia IIC T4
(Brazil) INMETRO: DNV 12.0068 X
Ex ia IIC T4 Ga
IP66/IP67/IP68
-40 ºC
≤ T a ≤ +80 ºC
DNV #OCP 0017
ABNT NBR IEC 60079-0:2008 e
ABNT NBR IEC 60079-11:2009
Non-incendive (US) FM
2
:
Class I, Div. 2, Groups A, B, C, D T5
• Marine Lloyd’s Register of Shipping
ABS Type Approval
Mechanical
• Process Connections:
threaded connection 1.5” NPT, BSP, or G (BS EN ISO 228-1)
•Antenna:
polypropylene rod hermetically sealed construction
Nominal 24 V DC at max. 550 Ohm
1.
See
Wiring Drawing: Intrinsically Safe (FM )
on page 2 of Appendix A, for drawing number 23651611,
or
Wiring Drawing: Intrinsically Safe (CSA)
on page 3 of Appendix A, for drawing number 23651621.
2.
See
Wiring Drawing: Non-incendive (FM)
on page 1 of Appendix A, for drawing number 23650537.
Note: The use of approved watertight conduit hubs/glands is required for Type 4X /
NEMA 4X, Type 6 / NEMA 6, IP67, IP68 (outdoor applications).
Note: EN61000-4-3 (CE EMC) testing was conducted on the SITRANS Probe LR while
mounted in a metallic vessel.
To Next Page
Loading...
