Siemens Sitrans LR200 User Manual

7ML19985JR01 SITRANS LR200 (PROFIBUS PA) – INSTRUCTION MANUAL Page 91
A: Parameter List
Appendix A: Alphabetical Parameter
List
Note: Maintenance Parameters are not listed below. See Remaining Device Lifetime
(3.4.) on page 71
, Remaining Sensor Lifetime (3.5.) on page 74 , Service Interval (4.17.) on
page 82 , and Calibration Interval (4.18.) on page 86 for those parameters.
Parameter Name (Parameter Number) Page Number
Algorithm (2.2.3.1.1.) 53
Auto False Echo Suppression (2.2.4.2.) 58
Auto Suppression Range (2.2.4.3.) 59
CLEF (Constrained Leading Edge Fit) Range (2.2.3.4.1.) 56
Device Address (5.1.) 89
Device Reset (4.1.) 80
Dimension A (2.2.2.4.) 51
Dimension L (2.2.2.5.) 51
Echo Lock (2.2.3.2.1.) 54
Echo Profile (3.2.) 69
Echo Threshold (2.2.3.1.2.) 53
Empty rate (2.2.6.3.) 62
Fail-safe Mode FB1 (2.4.2.) 67
Fail-safe Mode FB2 (2.4.4.) 67
Fail-safe Value FB1 (2.4.3.) 67
Fail-safe Value FB2 (2.4.5.) 68
Far Range (2.2.3.5.2.) 56
Fill Rate (2.2.6.2.) 61
Filter Time Constant (2.3.1.4.) 63
Firmware Revision (2.1.4.) 45
Hardware Revision (2.1.6.) 46
High Calibration Point (1.6.) 45
Language (7.) 89
LCD Contrast (4.3.) 81
LCD Fast Mode (4.2.) 81
Level Offset (2.2.1.9.) 48
Loader Revision (2.1.5.) 46
Siemens Industrial

Siemens Sitrans LR200 Specifications

General

Brand	Siemens
Model	Sitrans LR200
Category	Transmitter
Language	English