Page EN-4 SITRANS Probe LU (PROFIBUS PA) – QUICK START MANUAL A5E32081626
mmmmm
English
(Brazil) INMETRO: DNV 12.0084 X
Ex ia IIC T4 Ga
IP67/IP68
-40 ºC
≤ T a ≤ +80 ºC
DNV #OCP 0017
ABNT NBR IEC 60079-0:2008
ABNT NBR IEC 60079-11:2009 e
ABNT NBR IEC 60079-26:2008
Non-incendive (US) FM
1
:
Class I, Div. 2, Groups A, B, C, D T5
Installation
Mounting location
Recommendations
• Ambient temperature should be within –40 to +80 °C (–40 to +176 °F).
• Provide easy access for viewing the display and programming via the handheld
programmer.
• Provide an environment suitable to the housing rating and materials of construction.
• Keep the sound path perpendicular to the material surface.
1.
See
FM: Class I, Div. 2 Connection Drawing
on page 5 of Appendix A, for drawing number 23650583.
Note: Approved dust-tight and water-tight conduit seals are required for outdoor Type 4X /
NEMA 4X, Type 6 / NEMA 6, IP67, IP68 locations..
WARNINGS:
• Installation shall only be performed by qualified personnel and in accordance with
local governing regulations.
• SITRANS Probe LU is to be used only in the manner outlined in this manual,
otherwise protection provided by the equipment may be impaired.
Note: Please refer to the device nameplate for approval information.
To Next Page
Loading...
