EasyManua.ls Logo

Siemens sitrans PROBE LU - Wiring Setups for Hazardous Area Installations

Siemens sitrans PROBE LU
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A5E32081626 SITRANS Probe LU (PROFIBUS PA) – QUICK START MANUAL Page EN-7
mmmmm
English
Wiring setups for hazardous area installations
Always check the device nameplate and process device tag to verify the approval rating.
1. Intrinsically Safe wiring
For wiring requirements: follow local regulations.
Approved dust-tight and water-tight conduit seals are required for outdoor Type 4X /
NEMA 4X, Type 6 / NEMA 6, IP67
, IP68 locations.
Refer to
Instructions specific to hazardous area installations (Reference European
ATEX Directive 94/9/EC, Annex II, 1/0/6)
on page 8.
2. Non-incendive wiring (FM US only)
Profibus PA
Entity:
Ui=24V
Ii=250mA
Pi=1.2W
Ci=1.0nF
Li=0
FISCO:
FieldDevice:
Ui=17.5 V
Ii= 380 mA
Pi= 5.32 W
Ci= 1.0 nF
Li= 0
Power Rating: 30V
, 20 mA Max.
Serial No: GYZ / B1034567
Assembled in Canada with domestic and imported parts
Siemens Milltronics Process Instruments, Peterborough
SITRANS Probe LU
7MLxxxx-xxxxx-xxxx
Encl.: NEMA/TYPE 4X, 6, IP67, IP68
Amb.Temp.: 40°C to 80°C
Ex ia IIC T4 Ga
DNV 12.0084 X
0518
Ex ia IIC T4 Ga
SIRA 06ATEX2357X
1GII
ATENÇÃO - RISCO POTENCIAL DE CARGA ELETROSTÁTICA
- VEJA INSTRUÇÕES
KCC-REM-S49
PROBELU
OCP 0017
The ATEX certificate can be downloaded from the product
page of our website at: www.siemens.com/probelu
. Go to Support > Approvals /
Certificates.
Device nameplate (ATEX/INMETRO/C-TICK)
Entity:
Ui= 24V
Ii= 250mA
Pi= 1.2W
Ci= 1.0nF
Li= 0
Serial No: GYZ / B1034567
Encl.: NEMA/TYPE 4X, 6, IP67, IP68
Amb.Temp.: 40°C to 80°C
Power Rating: 30V
,20mAMax.
Assembled in Canada with domestic and imported parts
Siemens Milltronics Process Instruments, Peterborough
SITRANS Probe LU
7MLxxxx-xxxxx-xxx-x
WARNING: Possible Static Hazard, Do Not Rub Or Clean On Site.
ClassI,Div1,Gr.A,B,C,D; T4
ClassII,Div1,Gr.E,F,G; ClassIII
Exia per drawing: 23650617
Profibus PA
Fisco:
Ui=17.5V
Ii=380 mA
Pi=5.32 W
Ci=1.0 nF
Li=0
R
159134
FM/CSA Intrinsically Safe connection drawing number 23650617 can be downloaded from
the product page of our website at: www.siemens.com/probelu
. Go to Support > Installation
Drawings > Level Measurement > Continuous - Ultrasonic.
Device nameplate (FM/CSA)
Class I,Div.2,
Group A,B,C,D
Temp.Code:T5
PROFIBUSPA
Serial No: GYZ / S1034567
Encl.:
NEMA/TYPE 4X, 6, IP67, IP68
Amb.Temp.: 40°C to 80°C
Power Rating: 30V
,20mAMax.
Assembled in Canada with domestic and imported parts
Siemens Milltronics Process Instruments, Peterborough
SITRANS Probe LU
7ML1234-78910-ABC-D
FM Class 1, Div 2 connection drawing
number 23650583 can be downloaded from the product page of our website at:
www.siemens.com/probelu
. Go to Support > Installation Drawings > Level Measurement >
Continuous - Ultrasonic.

Other manuals for Siemens sitrans PROBE LU

Related product manuals