Siemens sitrans PROBE LU - AIFB Processing and Simulation

Page 52 SITRANS Probe LU (PROFIBUS PA) – INSTRUCTION MANUAL 7ML19985JB02
mmmmm
E: LCD menus
5. Maintenance
settings
Condensed Status Setup
1. Remaining Device
Lifetime
2. Remaining Sensor
Lifetime
3. Service Interval
4. Calibration Interval
1. Time Elapsed Since Last Service
2. Maintenance Required Limit
3. Maintenance Demanded Limit
4. Maintenance Alert Activation
5. Total Service Interval
6. Units
7. Maintenance Status
8. Acknowledge Status
9. Acknowledge
Service Interval
See Condensed Status Set-
up page 53
1. Time Elapsed Since Last Calibration
2. Maintenance Required Limit
3. Maintenance Demanded Limit
4. Maintenance Alert Activation
5. Total Calibration Interval
6. Units
7. Maintenance Status
8. Acknowledge Status
9. Acknowledge
1. Total Device Operating Time
2. Remaining Device Lifetime
3. Maintenance Required Limit
4. Maintenance Demanded Limit
5. Maintenance Alert Activation
6. Total Expected Device Life
7. Units
8. Maintenance Status
9. Acknowledge Status
10. Acknowledge
Remaining
Device Lifetime
1. Total Sensor Operating Time
2. Remaining Sensor Lifetime
3. Maintenance Required Limit
4. Maintenance Demanded Limit
5. Maintenance Alert Activation
6. Total Expected Sensor Life
7. Units
8. Maintenance Status
9. Acknowledge Status
10. Acknowledge
Remaining Sensor Lifetime
Maintenance
settings
Calibration Interval