Siemens SL55 - Voice Command

[ Extras
103
SL55 Fugu, lang en, A31008-H4910-A1-2-7619 (6. March 2003, 13:09)
© Siemens AG 2001, I:\Mobil\L55\SL55_Fugu\en_v2\Langversion\SL55_Extras.fm
Voice command
Functions can be started by a voice
command. A maximum 20 voice re-
cordings for voice dialling or voice
commands can be saved in the
phone (not on SIM card!).
Record
§Menu§K
[
KVoice command
A list with the functions available is
displayed.
G
Select a function.
§Record§ Press.
§Yes§ Confirm selected
function.
§Start§ Start recording.
A short signal sounds. Now say the
command corresponding to the
function and repeat it when
prompted.
Apply
Hold down the plus/minus side key at
the bottom (in standby mode).
A short signal (beep) sounds and a
prompt appears in the display. Now
say the function.
Voice command menu
G
Highlight required entry.
§Options§
Open menu
.
Noisy environments may affect voice rec-
ognition.
Playing
Play back the recording be-
longing to the entry.
New
sample
Start new recording for an
entry.
Delete
Delete entry.
Delete all
Delete all recordings.