Siemens SL55 - Conference

Calling
24
SL55 Fugu, lang en, A31008-H4910-A1-2-7619 (6. March 2003, 13:09)
© Siemens AG 2001, I:\Mobil\L55\SL55_Fugu\en_v2\Langversion\SL55_Phone.fm
Conference
Call up to 5 parties one by one and
link them together in a conference
call. Some of the functions described
may not be supported by your serv-
ice provider or may have to be ena-
bled specially. You have established
a connection:
y menu§ Open menu and select
Hold. The current call is
put on hold.
J
Now dial a new number.
When the new connec-
tion is established ...
y menu§ ... Open menu and select
Conference. The held call is
joined.
Repeat procedure until all partici-
pants are linked together (up to
5participants).
End
B
All calls in the conference
finish simultaneously
when the End key is
pressed.
Or Close keypad.
Call menu
The following functions are only
available during a call:
y menu§ Open menu.
L
Swap
(p. 22)
Hold
(p. 22)
Microphone
Switch microphone on/off. If
switched off, the person on
the other end of the line
cannot hear you (muting).
Also:
* hold down.
Handsfree
(p. 22)
Volume
Adjust handset volume.
Conference
(See above)
Durat/
charges
Display call duration and (if
set,p. 40) costs accruing
during the call.
Send DTMF
(p. 111)
Call transfer
L
The original call is connect-
ed to the second one.
For you, both calls are now
ended.
Main menu
Access to main menu.
Call status
List all held and active calls
(e.g. conference call partici-
pants).