Need help?Do you have a question about the Siemens SlMATlC S5-010W and is the answer not in the manual?
General| Category | Controller |
|---|---|
| Data Memory | 256 Bytes |
| Digital Inputs | 8 |
| Power Supply | 24V DC |
| Communication | RS-232 |
Details the intended use of the S5-010W controller for automation tasks.
Describes the physical structure, housing, and modules of the S5-010W.
Explains the sequential execution of STEP 5 program statements by the processor.
Provides detailed technical data including construction, power, memory, and environmental specs.
Details the physical mounting and housing requirements for the S5-010W controller.
Explains how to connect the necessary power sources to the CPU and I/O modules.
Provides instructions for connecting external signal wires to the I/O module connectors.
Covers electrical design considerations, including power supply smoothing and noise reduction.
Includes important notes on handling CMOS modules and safety precautions during installation.
Specifies the physical dimensions and mounting hole patterns for various controller configurations.
Describes the functions of the LEDs, switches, and displays on the S5-010W controller.
Explains how to adjust the internal timers using switches and potentiometers.
Outlines the process of programming the controller using the STEP 5 language and hardware.
Details the steps for safely powering up and initiating the programmable controller.
Explains the configuration of coding jumpers and DIPFIX switches on various modules.
Provides a step-by-step procedure for replacing the CPU's lithium battery.
Outlines the initial power-up sequence and diagnostic steps for identifying issues.
Lists and diagrams the pin configurations for front and socket connectors.
Details the pin assignments for the memory submodule connector.
Presents timing diagrams for various signal operations and clock pulses.
Provides a reference table for S5-010 machine code operations and control signals.
To Next Page