(1) Tabletop
(2) Head end
(3) Table Stop button
(4) Handle to pull out the table top in case of emergency
(5) Emergency release
The tabletop can be moved horizontally into the magnet bore. When
moved completely out of the magnet, the tabletop may be moved
vertically as well.
The coil sockets are located at the head end and the foot end of the
patient table. For more information concerning the occupation of the
coil sockets, see: Coil operator manual
Coil sockets
3 MR system components
58
MR System | Operator Manual
Print No. M6-04401.621.02.02.02
To Next Page
Loading...
