Siemens syngo MR E11 - Operating the Dot Display; Patient Table; Description

Operating the Dot display
To operate the Dot display, use the jogwheel of the smaller control
unit. ( Page 54 Control units)
1 Turn the jogwheel to navigate through the icons.
2 Press the jogwheel to confirm the selection.
3 If necessary, adjust your settings by turning and pressing the
jogwheel.
Patient table
Description
The patient table is used for positioning the patient and the coils. The
table comprises several sockets and connections.
3.3.2
3.4
3.4.1
MR system components 3
MAGNETOM Skyra
fit
| syngo MR E11
57
Print No. M6-04401.621.02.02.02