TC35i AT Command Set
7.23 AT+CR
s
m
obil
e
TC35i_ATC_V02.07 Page 175 of 439 1/30/04
Confidential / Released
Parameter Description
0
(&F)
disable
1 enable
“REL ASYNC“ asynchronous non-transparent
Notes
• The PLMN influences the second air interface (to the terminator), therefore another mode may be established
from the network.
• Setting the value of
<mode> to 1 may lead to connection failure, if the application (e.g. WinFax) waits for
default result code/URC.
• The PIN is required for the write command only.
<mode>
(num)(&W)(&V)
<serv>
(str)
To Next Page
Loading...
Need help?
General
