For more technical support, please go to our website:
www.gillardcutting.com/technical
21
6.3 OPTIONS
From left to right, top to bottom:
Product Jam:
The machine will automatically detect if the product has jammed inside and stop the
cycle and alert the operator to the fault. The mode is either On or Off.
When the machine has detected the Product has jammed inside, the following
screen will be displayed:
Air Bush:
The bushes of the machine are injected with air to help the product manoeuvre
through more smoothly. The air supply is activated when the belts are running.
Broken Blade Sensor:
The machine will detect that the blade has broken and stop the cycle and alert the
operator to the fault. The value entered is how many revolutions the blade will do
before the cycle is stopped.
To Next Page
Loading...
