NLTroubleshooting
Malfunction Cause and Troubleshooting
Symbol voltage
undershoot (dub-
bele point).
Voltage undershoot can cause program extension.
No solution possible.
burns. Voltage undershoot can cause program extension.
No solution possible.
burns. Temperature is too high.
▶ Wait for the temperature to drop.
▶
→
"Program cancel", page 32
Water level is too high.
▶ Select a suitable program for draining.
→
"Programs", page 25
flashes. Door is not closed.
▶ Close the door.
Laundry is jammed in the door.
▶ Remove trapped laundry.
All other error codes. Malfunction
▶ Please contact customer service.
→
"After-sales service", Page 50
"E:30/-20" Solenoid valve defective.
▶ Please contact customer service.
→
"After-sales service", Page 50
Detergent dosage is too high.
▶ Reduce the amount of detergent for the next wash
with the same load.
Additional water filled.
▶ Do not fill the appliance with additional water during
operation.
Device not working. Mains plug of the power cable is not plugged in.
▶ Connect the device to the power supply.
The fuse in the fuse box has blown.
▶ Check the fuse in the meter box.
Power supply has failed.
▶ Check whether the interior lighting or other devices
are working.
Program does not start. Start/Refillwas not pressed.
▶ PressStart/Refill.
Door is not closed.
42
To Next Page
Loading...
