SIGLENT TECHNOLOGIES SDM3045X User Manual

Disassembly Procedures
1. Turn off the power and remove all measurement leads and other cables,
including the power cord, from the instrument before continuing.
2. Rotate the handle to the upright position and remove it by pulling outward
where it attaches to the case.
3. Unscrew the four captive screws in the rear bezel and remove the foot pads
as indicated by the arrow shown below

SIGLENT TECHNOLOGIES SDM3045X Specifications

General

Brand	SIGLENT TECHNOLOGIES
Model	SDM3045X
Category	Multimeter
Language	English