Need help?Do you have a question about the SIGLENT TECHNOLOGIES SDM3055 Series and is the answer not in the manual?
Covers proper power line, grounding, signal wire, ratings, suspected failures, circuit exposure, covers, fuses, over-voltage protection.
Guidelines for antistatic protection, ventilation, clean surface, and avoiding hazardous environments.
Over-voltage protection for mains connections up to 600VAC under Category II.
Definitions for WARNING, CAUTION, DANGER, CAT I, CAT II, and other safety terms.
Explains symbols used on the instrument for electrical hazards and grounding.
Steps for inspecting the shipping container, instrument, and accessories upon receipt.
Identifies and describes the components and buttons of the multimeter's front panel.
Details the interfaces and connectors located on the back panel of the multimeter.
Step-by-step guide for correctly powering on the instrument.
Explains the key elements and indicators on the multimeter's display screen.
Explains the difference between automatic and manual range selection for measurements.
Details how to select ranges using front panel keys or on-screen softkey menus.
Procedures for measuring DC voltage and current, including connections and setup.
Procedures for measuring AC voltage and current, including connections and setup.
Steps for measuring resistance using both 2-wire and 4-wire configurations.
Guides for measuring capacitance, frequency, and period of signals.
Instructions for performing continuity tests and diode tests with the multimeter.
Procedures for measuring temperature using various sensor types and settings.
Solutions for a dark screen or no display upon powering on the multimeter.
Troubleshooting steps for when AC or DC current readings do not change.
Solutions for the multimeter failing to recognize connected USB disks.
Covers proper power line, grounding, signal wire, ratings, suspected failures, circuit exposure, covers, fuses, over-voltage protection.
Guidelines for antistatic protection, ventilation, clean surface, and avoiding hazardous environments.
Over-voltage protection for mains connections up to 600VAC under Category II.
Definitions for WARNING, CAUTION, DANGER, CAT I, CAT II, and other safety terms.
Explains symbols used on the instrument for electrical hazards and grounding.
Steps for inspecting the shipping container, instrument, and accessories upon receipt.
Identifies and describes the components and buttons of the multimeter's front panel.
Details the interfaces and connectors located on the back panel of the multimeter.
Step-by-step guide for correctly powering on the instrument.
Explains the key elements and indicators on the multimeter's display screen.
Explains the difference between automatic and manual range selection for measurements.
Details how to select ranges using front panel keys or on-screen softkey menus.
Procedures for measuring DC voltage and current, including connections and setup.
Procedures for measuring AC voltage and current, including connections and setup.
Steps for measuring resistance using both 2-wire and 4-wire configurations.
Guides for measuring capacitance, frequency, and period of signals.
Instructions for performing continuity tests and diode tests with the multimeter.
Procedures for measuring temperature using various sensor types and settings.
Solutions for a dark screen or no display upon powering on the multimeter.
Troubleshooting steps for when AC or DC current readings do not change.
Solutions for the multimeter failing to recognize connected USB disks.
General| Brand | SIGLENT TECHNOLOGIES |
|---|---|
| Model | SDM3055 Series |
| Category | Multimeter |
| Language | English |
To Next Page