SIGLENT SPD3303X-E - Network Configuration Commands

SIGLENT
34 SPD3000X QuickStart
Bit No.
Corresponding state
0
0: CH1 CV mode; 1: CH1 CC mode
1
0: CH2 CV mode; 1: CH2 CC mode
2,3
01: Independent mode; 10: Parallel mode
11: Series mode
4
0: CH1 OFF 1: CH1 ON
5
0: CH2 OFF 1: CH2 ON
6
0: TIMER1 OFF 1: TIMER1 ON
7
0: TIMER2 OFF 1: TIMER2 ON
8
0: CH1 digital display; 1: CH1 waveform diplay
9
0: CH2 digital display; 1: CH2 waveform diplay
11. IPaddr
Command format
IPaddr <IP address>
Description
Assign a static Internet Protocol (IP) address for the
instrument
Example
IPaddr 10.11.13.214
Note
The command is invalid when the state of DHCP is on
Command format
IPaddr?
Description
Query the current IP address of the instrument
Typical Return
10.11.13.214
12. MASKaddr
Command format
MASKaddr <NetMasK>
Description
Assign a subnet mask for the instrument
Example
MASKadd 255.255.255.0
Note
The command is invalid when the state of DHCP is on