Page 10 User Manual APOLLO
key that corresponds to the day you wish the system to auto disarm, the
relative LED turns on or off. If you wish to cancel one of these days press
again the relative key.
To read the days of weekly auto disarm, press:
¾ [READ] [TIME] [6], for partition A.
¾ [READ] [TIME] [9], for partition B.
On the LED DISPLAY you have the letter "d" and the LED’s
indicating the relative days turn on.
To delete the days of weekly auto disarm, press:
¾ [TIME] [6] [ENTER], for partition A.
¾ [TIME] [9] [ENTER],
for partition B.
NOTE: The programming of time, date and auto arming or
disarming can be done only using the user main code (01).
ARMING-DISARMING VIA DOWNLOADING
Use the following procedure to activate arming and disarming via the
downloading software. In factory default programming this function is
activated. This function may be activated or deactivated only via the
keypad of the system using the main user code (01) and not via
download.
¾ [ADDRESS] [0] [0] [0], if you wish to disable arming-disarming
via Downloading Software.
¾ [ADDRESS] [0] [0] [1], if you wish to enable arming-disarming
via Downloading software.
To verify data programmed, in this memory location, press [READ]
[ADDRESS] [0] [0].
NOTE: This function may be programmed only by main user
code (01) using the system keypad, and not by the downloading
software.
PROGRAMMING THE "FOLLOW ME" TELEPHONE
NUMBER
The main user code may be used to program , edit or delete the
To Next Page
Loading...