Page 8 User Manual APOLLO
on.
In order to read, the programmed day of the week, press: [READ]
[TIME] [2]. The LED corresponding to the programmed day of the week
will turn on.
PROGRAMMING THE DATE
To program, the date of the system, press [TIME] [3] [D] [D] [Μ] [Μ]
[Y] [Y].
¾ [D] [D], the numder of the day (01-31).
¾ [Μ] [Μ], the number of the month (01-12).
¾ [Y] [Y], the number corresponding to the year. For year 2005
press [0] [5].
To verify, the date programmed in the system, press [READ]
[TIME] [3]. On the DISPLAY you will have the date of the system and
also the LED corresponding to the programmed day of the week will turn
on.
PROGRAMMING AUTO ARM AND DISARM TIME
The control panel may be programmed to automaticaly arm and
disarm the same time every day of the week. The auto arming and
disarming time may be different for every partition. If the system
operates in a single partition programming for the second partition
are not nessecary.
Automatic arming operates independently from automatic disarming.
Thus, you may program the system to, only, automatically arm or disarm
the desired partition.
Automatic Arming:
To program the time the control panel will automatically arm, press:
¾ [TIME] [4] [H] [H] [M] [M], for partition A.
¾ [TIME] [7] [H] [H] [M] [M], for partition B.
To read auto arm time, press:
¾ [READ] [TIME] [4], for partition A.
¾ [READ] [TIME] [7], for partition B.
To cancel auto arm time, press:
To Next Page
Loading...