SA300 Installation Instructions
9.
Safety Signage and Access Control Placement
•
Always apply supplied stickers on both sides of the door at locations stipulated by local codes.
•
See ANSI standard A156.19 requirements for additional safety decal information
•
Safety signage included with SA300 are double-sided labels intended for application on clear glass. A
second set of labels will be required if labels are applied on an opaque or non-transparent surface.
•
AAADM (American Association of Automatic Door Manufacturers) Safety Checklist Sticker is single sided
and must be applied to side of the door frame where the operator is installed.
AAADM
Sticker
Bilingual
Versions
Available
58 ±5
(147 ±12.7)
42
(106.7)
INCH
(CM)
To Next Page