Sigma AUTOMATICS SA300 - SA320 Surface Mounted Paired Operator (Auto;Auto - Double Auto); SA350 Surface Mounted Paired Operator (Auto;Manual); Appendix 1: Other Device Configurations

SA300 Installation Instructions
REV.2021-12-07
32 / 33
10. Appendix 1: Other Device Configurations
10.1. bSA320 Surface Mounted Paired Operator (Auto/Auto – Double Auto)
Parts list for a surface mounted header, paired operators and regular arm kits.
No.
Description
Part Number
1
Operator cover and screws
SA-PH-001
2
Operator motor and gearbox x2
SA-PM01 (motor)
SA-PG01 (gearbox)
3
Operator control board and transformer x2
SA-PC01
4
Push Arm Kit x2
SA-PR01
5
Pull Arm Kit x2
SA-PR02
6
Operator magnetic door sensors
SA-PG-011
7
L16 Connector
SA-2716
10.2. SA350 Surface Mounted Paired Operator (Auto/Manual)
Parts list for a surface mounted header, single operator paired with manual door closer and regular arm kits:
No.
Description
Part Number
1
Operator cover and screws
SA-PH-001
2
Operator motor and gearbox
SA-PM01 (motor)
SA-PG01 (gearbox)
3
Operator control board and transformer
SA-PC01
4
Push Arm Kit x2
SA-PR01
5
Pull Arm Kit x2
SA-PR02
6
Operator magnetic door sensors
SA-PG-011
7
Mounting plate for manual door closer*
SA-PG11
8
L16 Connector
SA-2716
(*) Manual door closer not included, sold separately. DOREX 441HD or equivalent recommended.