Instruction, use and maintenance manual Pag. 21/39
BMR 20-20H-30 Planetary Mixer
11. Transport and installation
11.1. Transport and handling
11.1.1. Machine on pallet
Make sure that the lifting means complies with the load.
Widen the lifting forks to the maximum and ensure they protrude from the pallet.
Work in an area clear of things, people or animals.
During movements, always keep the load as close to the ground as possible.
Use the necessary PPE.
11.1.2. Machine without pallet
Given its instability, the machine must be handled with appropriately robust straps, moving it below
people's heads, as shown in the figure to the right.
Make sure that the lifting equipment is adequate to the load, work in an uncluttered area and, during
movements, always keep the load as close to the ground as possible.
Use the necessary PPE.
When lifted, the machine assumes a position that is slightly inclined by 10-15 degrees.
Forklift lifting standards: to handle the machine, always use a pallet.
To Next Page
Loading...
