45
M
MANUAL EXPOSURE
Set both the shutter speed and aperture
value according to the indication of
the exposure meter. You can
change
the exposure, as you desire.
1
Set the Mode Dial to the
M
position.
(The shutter speed value is illuminated
in green. The aperture value is illuminated
in orange.)
2
Select the desired shutter speed
value by using
button.
3
Set the exposure value to ±0.0 by
using
button.
• The exposure meter can display an
exposure error of up to ± 3 stops from
the correct exposure in
1
/
3
steps. If the
exposure error is more than three stops,
the exposure meter will blink.
4
Press the shutter button “half-way” to
verify the focus and take the picture.
• It is possible to change the combination of shutter speed and aperture
value as follows.
Shutter Speed Aperture
15s ~ 1/1000s F4.0 ~ F11
1/1250s F5.6 ~ F11
1/1600s F8.0 ~ F11
1/2000s F10 ~ F11
• When the aperture value is set to an unavailable value by changing the
shutter speed value, the shutter speed value will be changed to an
available value automatically.
• When the shutter speed value is set to an unavailable value by changing
the aperture value, the aperture value will be changed to an available
value automatically.
To Next Page
Loading...
Need help?
General
