51
TIP
• It is possible to change the indicator of the scale bar. Select m (meter)
or ft (feet) from [ Camera Settings](P.26)→[MF Scale Units].
OPERATION OF THE DRIVE MODE
Operation of the self-timer, and other functions of the camera
are explained by the following:
Operation of The Drive Mode can be set
in Quick Set Manu or [
Capture
Settings] (P. 2 6 ) → [Drive Mode].
Single Capture*
Continuous
Self Timer 2 sec.
Self Timer 10 sec.
SINGLE FRAME SHOOTING
[Single Capture]
When you press the shutter button in the single frame-shooting mode,
only one frame will be exposed. Then the camera will be ready for the
next shot by advancing one frame. Single frame shooting mode is
recommended for ordinary photography.
To Next Page
Loading...
