Sigma DP1X - Auto Rotate

70
AUTO ROTATE
It is possible to record the vertical image information to images.
The Auto Rotate can be set by [ Capture Settings] (P. 2 6) → [Auto
Rotate].
Of
f
The vertical image information will not be recorded.
On* The vertical image information will be recorded.
The default setting is [On].
● When vertically orientated images are reviewed, they will
automatically rotate and be displayed vertically.
● When vertically orientated images are reviewed in Sigma Photo Pro,
they will automatically rotate and be displayed vertically.
● When vertically orientated images are rotated by pressing
[
Playback Menu] → [Rotate], this rotated orientation will be
stored.
WARNING !!
• If the images are taken while the camera is pointed up or down, the
vertical position information may not be recorded properly.