SIGNIFY EA2306 - Other Useful Information; Cleaning and Maintenance; Storage; Trademarks

27
AFTER SALES SUPPORT
1300 777 137
service@unclebills.com.au
MODEL: EA2306 PRODUCT CODE: 713007 08/2023
Cleaning and Maintenance
• Before cleaning the Motorcycle Bluetooth
®
Kit, ensure the unit is
switched off and disconnected from the USB-C charging cable.
• The Motorcycle Bluetooth
®
Kit is likely only to require regular “dusting”
to keep it clean. Use a standard duster, or dry soft microbbre cloth to
remove the dust from the unit.
• If the Motorcycle Bluetooth
®
Kit becomes soiled with anything other
than dust on its exterior, clean the exterior of the unit by wiping over the
surface with a slightly damp cloth and then polish with a soft dry cloth.
Ensure that no moisture or liquid enters the Motorcycle Bluetooth
®
Kit,
particularly around the buttons and dials.
• Be careful when wiping over the Motorcycle Bluetooth
®
Kit, that you do
not apply too much pressure, as there is a risk that you may break parts.
• Do not use detergents or abrasive cleaners, and do not allow moisture,
water or other liquid to enter the Motorcycle Bluetooth
®
Kit.
Storage
When the Motorcycle Bluetooth
®
Kit is not in use, disconnect it from the
USB-C charging cable and store in a cool, dry and well ventilated location
out of direct sunlight. Ensure that it is not subject to humidity.
Trademarks
The Bluetooth
®
word mark and logos are registered trademarks owned
by Bluetooth
®
SIG, Inc. and are for compatibility purposes only. Other
trademarks and trade names are those of their respective owners. These
brands are not associated with this product and are not related to Uncle
Bill's Australia Pty Ltd.
Other Useful Information