AFTER SALES SUPPORT
1300 777 137
service@unclebills.com.au
MODEL: EA2306 PRODUCT CODE: 713007 08/2023
14
Instructions
Charging the Headset
1. Connect the Type-C end of the USB-C charging cable (included) into
the USB charging port on the headset.
2. Insert the other end of the USB-C charging cable into a suitable
5V USB power supply. The LED indicator will illuminate (red) while
charging.
3. Dependent on the charging source, it may take up to 2.5 hours to fully
charge the battery.
4. Once charging has nished, the LED indicator (red) will turn off.
Turning the Headset On/Off
1. Press and hold the power/intercom button for approximately 2 seconds
to turn the headset on. The LED indicator (blue) will ash quickly for a
short period of time and then at slower intervals indicating the headset
is powered on correctly.
2. Press and hold the power/intercom button for approximately 3 seconds
to turn the headset off. The LED indicator will turn red (followed by no
colour) to indicate the power is off.
NOTE: It is recommended to charge the headset for up to 2.5 hours
prior to rst use.
Bluetooth
®
Connection
The Motorcycle Bluetooth
®
Kit features a wireless Bluetooth
®
connection
enabling calls and music to be streamed directly from compatible devices
such as Smartphones, MP3 players and GPS navigation systems. Before
using the Bluetooth
®
connection you must rst pair your chosen device.
Please follow the steps below to pair and use the Bluetooth
®
connection.
To Next Page
Loading...