13
AFTER SALES SUPPORT
1300 777 137
service@unclebills.com.au
MODEL: EA2306 PRODUCT CODE: 713007 08/2023
NOTE: Some helmets may contain removable padding on the inside.
You may need to run the microphone between the padding to ensure
there is enough room inside the helmet.
7. Connect the microphone plug to the socket on the dual hook and loop
earphone mounts and then insert the micro USB plug of the dual hook
and loop pad earphone mounts to the earphone input located at the
bottom of the headset.
8. Tuck any excess cable from the microphone and dual hook and loop
earphone mounts inside the helmet.
NOTE: It is recommended that only a few centimetres of the
microphone cable comes out from the headset.
INSTALLATION (cont.)
To Next Page
Loading...