Signode BXT3-19 - Default Chapter; Table of Contents

3 von 37V 07.17
Service Manual BXT3-13/16/19
ENGLISH
Table of contents
1 General information 4
1.1 Safety 4
1.2 Target group 4
1.3 Changes 4
2 Periodic maintenance 5
2.1 Implementation 5
2.2 Maintenance requirements table 6
2.3 Maintenance table 7
2.4 Clean the tool 8
2.5 Lubrication plan 8
3 Problemidentication 9
3.1 Diagnosis of mechanical or electro-mechanical faults 9
3.2 Diagnosis of electronic faults 12
3.3 Error lists 13
3.4 Service interface (PT-Studio) 17
4 Preventive maintenance work (wear parts) 20
4.1 Replacing tension wheel, tooth plate and knife 20
5 Corrective maintenance work 21
5.1 Electronics components 21
5.2 Housing parts 22
5.3 Wiring components and switches 23
5.4 Mechanical components 24
5.5 Motor 26
5.6 Rocker lever 27
5.7 Wrap spring clutch unit 27
5.8 Tensioning system 28
5.9 Gear 29
5.10 Blocking of the welding mechanism 30
5.11 Wiring 31
6 Electric diagram 33
7 Firmware-update 34
8 Product information 37
9 Contact 37