Need help?Do you have a question about the Signode BXT3-16 and is the answer not in the manual?
Essential safety guidelines and warnings for operating and servicing the tool.
Troubleshooting common mechanical and electro-mechanical issues encountered during operation.
Diagnosing and resolving problems specific to the strap welding and cutting process.
Identifying and understanding various electronic errors, system faults, and their classifications.
Comprehensive lists of error codes, system responses, and recommended rectifications.
Detailed overview of various system errors related to battery and hardware.
Specific system errors related to internal electronics and thermal limits.
Guidance on troubleshooting specific process errors with error codes and rectifications.
Steps to start PT-Studio software and connect it to the tool.
Explanation of causes and rectification steps for a jammed welding mechanism.
Step-by-step guide for updating the tool's firmware using PT-Studio.
Selecting update modes and firmware versions within the PT-Studio wizard.
Procedure for starting and completing the firmware update process.
General| Sealing Type | Friction weld |
|---|---|
| Strap Type | Polyester |
| Strap Width | 16 mm |
| Strap Thickness | 0.5 - 1.05 mm |
| Battery | Li-Ion |
| Weight | 3.9 kg |
To Next Page
