Signode BXT3-32 - Select Favorite; Sleep Mode

16 of 26
V 04.21_EN
SIGNODE BXT3-32
4.7 Select Favorite
The "Favorite" function activates a second setting level whose parameters can be set freely as at the
main level. This allows the user to switch quickly from one tool setting to another.
Activating Favorite:
► Press the "Favorite" button (1).
– The star (2) changes from outlined to
lled.
– All parameters change to the values pre-
set at this setting level.
Deactivating Favorite:
► Press the "Favorite" button (1).
– Thestar(3)changesfromlledtoout-
lined.
– All parameters change to the values pre-
set at this setting level.
4.8 Sleep mode
To avoid unnecessary battery discharge, the tool switches to energy-saving mode within short time.
– The operating panel becomes dark (not Illuminated).
► Pressingtheoperatingpanelswitchestheenergy-savingmodeo󰀨again.
After approx. two minutes without operation the tool switches to sleep mode.
– Theoperatingpanelisswitchedo󰀨(black).
► Actuatingtherockerleverswitchesthesleepmodeo󰀨again.
2
1
3