Signode BXT3-32 - Technical Data

25 of 26
V 04.21_EN
SIGNODE BXT3-32
7 Technical data
BXT3-32
Weight 6.7 kg (14.7 lb) (incl. battery)
Dimensions Length: 416 mm width: 157 mm Height: 158 mm
(16.4”) (6.2”) (6.2” )
Strap tension (0) 3000–7000 N (675–1570 lbf)
Soft: 1000–5000 N (225–1120 lbf)
Tension speed 0–100 mm/s (0–3.9 in/s)
Sealing Friction weld
  (Seale󰀩ciencyapprox.75%ofstraptensilestrength)
Typical measured A-rated
emission sound pressure level*
– EN 60745-1/2:2009 L
pA
86 dB (A)
Deviation K
pA
3.0 dB (A)
Average sound power level*
– EN 60745-1/2:2009 L
WA
97 dB (A)
Deviation K
WA
3.0 dB (A)
Vibrations at handle*
– EN 60745-1/2:2009 a
h
4,0 m/s
2
Deviation K 1.5 m/s
2
Operating temperature for the
strapping tool (see separate oper-
ating instructions for battery and
charging device) –10 °C to +40 °C (14–104 °F)
Relative humidity Up to 90 %
CHARGER / BATTERY
Rated voltage charger 100 / 110 / 230 V
Charger type BOSCH GAL 1880 CV
Charging time approx. 70–80 min. = 100% charging capacity
approx. 55–70 min. = 80% charging capacity
Strappings with one battery charge 250–450 depending on strap, strap tension and package
Battery Bosch Li-on ProCORE 18 V/8.0 Ah
(US: Li-Ion CORE GBA 18V80)
PLASTIC STRAP
Strap type Polyester (PET) for recommended straps, see next page
Strap width adjustable to 25 or 32 mm (1″or1
1
/
4
″)
Strap thickness 0.90–1.30 mm (.035″–.051″)
* refer to Section 2.4, Vibration and noise exposure