Signode BXT3-32 - EC Declaration of Conformity (Copy)

26 of 26
V 04.21_EN
SIGNODE BXT3-32
Recommended plastic straps:
– Tenax 2480, 25 x 1,0 mm (1″x.039″)
– Tenax 2425, 25 x 1,27 mm (1″x.049″)
– Tenax 2680, 32 x 1,0 mm (1
1
/
4
″x.039″)
– Tenax 2625, 32 x 1,27 mm (1
1
/
4
″x.049″)
8 EC Declaration of Conformity (copy)
(CE 2006/42/EC, Annex II 1.A.)
The manufacturer take sole responsibility for declaring that the machines to which this declaration
refers are in full conformity with the current requirements of the Council Directive of 17th May 2006
(2006/42/EC) “Machine Directive” and its amendments.
Furthermore, electrical installations are in conformity with the requirements of the Council Directive of
26th February 2014 (2014/30/EU) “EMC Directive”.
The following harmonised standards
were taken into account: EN 60745-1:2009 + A11:2010; EN 60745-2-18:2009; EN ISO
12100:2011; EN 349:2008; EN 61000-6-1; EN 61000-6-3
CBTestCerticate: NL-69251
Placeofcertication: DEKRACerticationB.V.
Meander 1051, NL-6825 MJ Arnhem, Netherlands
Type designations: BXT3-32
From machine no./ year of construction D/20111001 / 2020
CH-8953 Dietikon, 17.11.2020
R. Siegrist M. Binder
Managing Director Director-Head of Global R&D
Agent for the publication of technical documentation:
Signode Switzerland GmbH, Silbernstrasse 14, 8953 Dietikon 1, Switzerland
Manufacturer
Signode Switzerland GmbH
Silbernstrasse 14, Postfach
8953 Dietikon 1
SWITZERLAND
signode.com