SIKA TD 32500 User Manual

SIKA TD 32500 Operating Manual
5.2.5.1.2 Programming the lower limit of the analogue output range:
• The message „SET 0mA/4mA/0V – NO“ appears.
• Switch with the ▲ key to „YES“ and confirm with the
↵
key.
• The message appears „VALUE OK ?“ together with the last entered
l
ower limit of the analogue output range.
• Switch with the ▲ key to „CHANGE VALUE ?“ and confirm with the
↵
k
ey.
• A cursor appears. Set with the ▲ key the respective digit of the new
lower limit and confirm it with the
↵
key.
• Continue to program the upper limit of analogue output, return to the
m
enu start or quit the configuration menu.
5.2.5.1.3 Programming the upper limit of the analogue output range:
• The message „SET 20mA/10V – NO“ appears.
• Switch with the ▲ key to „YES“ and confirm with the
↵
key.
• The message appears „VALUE OK ?“ together with the last entered
upper
limit of the analogue outputs.
• Switch with the ▲ key to „CHANGE VALUE ?“ and confirm with the
↵
k
ey.
• A cursor appears. Set with the ▲ key the respective digit of the new
upper limit and confirm it with the
↵
key.
• Quit the configuration menu, return to the menu start or continue to
c
onfigure the successive parameters.

SIKA TD 32500 Specifications

General

Brand	SIKA
Model	TD 32500
Category	Measuring Instruments
Language	English