EasyManuals Logo

Siko AG25 Translation Of The Original Installation Instructions

Siko AG25
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
AG25
Accessory connector English
AG25 · Date 19.07.2022 · Art. No. 87450 · Mod. status 157/22
41
Only for EU countries: Defective or used batteries must be recycled accord-
ing to Directive 91/157/EEC.
8 Accessory connector
(not included in the scope of delivery)
8.1 Straight matting connector M12
Advice
` Strand cross sections of lines max. 0.75mm² / cable feed-through:
ø6 ... ø8mm.
Accessory SIKO art. no. "83526" M12 A coded (socket contact 4 poles
operating voltage ).
Accessory SIKO art. no. "83525" M12 A coded (socket contact pin 8
poles digital input / output).
Accessory SIKO art. no. "87601" M12 D-coded (plug pin 4 poles Port1
+ Port2).
Mounting (Fig. 15)
1. Slide parts
1
...
4
over cable sheath.
2. Strip the cable.
3. Shorten, expand the shielding and lay around the shielding ring
4
.
4. Run strands through coupling sleeve
5
and strip them.
5. Mount parts
2
...
4
. Turn pressure screw
1
to secure the cable.
6. Thread insulating sleeve
6
, solder strands and mount insulating
sleeve.
7. Screw coupling sleeve
5
with element
7
and tighten pressure screw
1
.
Fig. 15: Straight matting connector M12
NOTICE

Other manuals for Siko AG25

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siko AG25 and is the answer not in the manual?

Siko AG25 Specifications

General IconGeneral
BrandSiko
ModelAG25
CategoryController
LanguageEnglish

Related product manuals