Siko AP04 - System Commands and Configuration; Calibration and Alignment Procedures

AP04
English
AP04 · Date 19.05.2016 · Art. No. 84211 · Mod. status 154/16
21
Table of contents
1 Documentation . . . . . . . . . . . . . . . . . . . 22
2 Safety information . . . . . . . . . . . . . . . . . . 22
2.1 Intended use . . . . . . . . . . . . . . . . . . . 22
2.2 Identification of dangers and notes . . . . . . . . . . 22
2.3 Target group . . . . . . . . . . . . . . . . . . . 23
2.4 Basic safety information . . . . . . . . . . . . . . 23
3 Identification . . . . . . . . . . . . . . . . . . . . 24
4 Installation . . . . . . . . . . . . . . . . . . . . . 24
4.1 Mechanical mounting . . . . . . . . . . . . . . . 25
4.2 Electrical Installation . . . . . . . . . . . . . . . 26
5 Commissioning . . . . . . . . . . . . . . . . . . . 30
6 Battery change . . . . . . . . . . . . . . . . . . . 33
6.1 Battery, function and service life . . . . . . . . . . . 34
6.2 Operating states . . . . . . . . . . . . . . . . . 34
6.3 Changing the battery unit . . . . . . . . . . . . . 34
6.4 Faults after battery change . . . . . . . . . . . . . 35
7 Transport, Storage, Maintenance and Disposal . . . . . . 35
8 Accessory connector . . . . . . . . . . . . . . . . . 36
8.1 Mating connector M8 straight inclusive cable . . . . . . 36
8.2 Straight matting connector M8 . . . . . . . . . . . 36
8.3 Mating connector M8 bus terminator . . . . . . . . . 37
9 Technical data . . . . . . . . . . . . . . . . . . . . 37