Need help?Do you have a question about the Siko AP04 and is the answer not in the manual?
General| Resolution | 480 x 272 pixels |
|---|---|
| Touch Technology | Resistive |
| Display Type | TFT |
| Display Size | 4.3 inches |
| Supply Voltage | 24 V DC |
| Interfaces | Ethernet |
| Protection Class | IP65 |
| Operating Temperature | 0°C to +50°C |
| Storage Temperature | -20 ... +70 °C |
| Power Supply | 24 V DC |
Outlines manual parameterization steps including starting, value input, and value selection.
Lists parameters for bus communication like node address, baud rate, and protocol selection.
Details parameters for positioning, such as readout per revolution, decimal places, and sense of rotation.
Covers parameters for display orientation, LED functions, and direction indication.
Details parameters for key enable time, reset, incremental measurement, and operating mode.
Mentions parameterization via the SIKONETZ5 protocol over the RS485 interface.
Lists parameters with their number, name, selection/value, default, and detailed description.
Explains how error states are signalled, need acknowledgment, and lists error codes with descriptions.
Details the steps required for calibration and additional alignment of the position indicator.
To Next Page
