23
GB
1. Overview
1 On/off switch
2 Suction device
3 Handle
4 Socket for direct connection of the power adapter
5 Charging contacts (for charging on the base station)
6 Unlocking mechanism of the battery
7 Battery compartment
8 Dust container
9
z
Marking for mounting the dust container
10 Metal filter (on filter carrier)
11 Flap for emptying the dust container
12 Filter carrier (inside the dust container)
13 Paper filter (HEPA) (inside the filter carrier)
14 Button for opening the dust container
15 Motor protection filter (inside the filter carrier above the paper filter)
16 Opening at the suction device for the suction pipe and nozzles
17 Socket for holding the plugs of the suction pipe / floorhead
18 Exhaust air filter
19 Filter cover
20 Unlocking mechanism for the filter cover
21 Charging indicator of the battery + LEDs flash when the rotating brush
or hard floor roller is blocked
22 ECO ECO button with LED (reduces the suction power)
23 Hook for hanging up the suction device
24 Socket for power adapter
25 Power adapter with power cable
26 Base station
27 Holders for crevice nozzle and brush nozzle
28 Charging indicator on battery + Charging indicator flashes when the
rotating brush or hard floor roller is blocked
29 Battery
30 Plug for connection to the suction device*
31 Release buttons (on both sides)*
32 Suction pipe
33 Socket for holding the plug of the floorhead
34 Opening on the suction pipe for the nozzles
35 Floorhead (with joint)
36 Rollers of the floorhead
37 Rotating brush
38 Inspection window of the floorhead
39 LED bar for illuminating the area to be vacuumed + LED bar flashes
when the rotating brush or hard floor roller is blocked
40 Hard floor roller (for insertion into the floorhead)
41 Ridge (plugs into the socket on the suction pipe or suction device)
__338023_Handstaubsauger_B8.book Seite 23 Mittwoch, 15. Juli 2020 10:25 10
To Next Page
Loading...
