Silvercrest SHLF 1000 A2 - Storage; Troubleshooting

■ 16
│
GB
│
IE
SHLF 1000 A2
10. Storage
1) To lift or carry the appliance, place both hands under the side of the
appliance. Never use the handle 8 of the frying pot 7!
2) Store the appliance with the frying pot 7 and the frying insert 5
inside it. This keeps the inside of the appliance and the accessories
clean and dust-free.
3) Store the appliance in a dry and dust-free location.
11. Troubleshooting
PROBLEM POSSIBLE CAUSE
POSSIBLE
SOLUTIONS
The appliance will
not start.
The frying pot 7 is not
properly clicked into place.
Make sure that the frying
pot 7 is correctly fitted
into the housing q.
The appliance is
not working.
The appliance is not
connected to a mains
power socket.
Connect the appliance to
a mains power socket.
The appliance is switched
off.
Switch the appliance on
by turning the timer 4.
The appliance is defective.
Contact the Customer
Service department.
The food is under-
cooked or unevenly
fried after the set
time.
Too much food in the
frying pot 7.
Do not fill the frying pot
7 to more than the MAX
marking 6.
Pieces too big.
The pieces of food are
too close to each other.
Cut the food into smaller
pieces.
Turn the food or shake
it several times during
cooking.
The temperature is too
low or the cooking time
too short.
Increase the temperature
or the cooking time.
Strong smoke or
odour development
during cooking.
The food is in contact with
the heating element and is
burning.
Do not fill the frying pot
7 to more than the MAX
marking 6.