Silvercrest SL 80/2 100CI - Connection of an Audio-Digital Receiver

- 24 -
Connection of an audio-digital receiver
If you want to use 5-channel audio transmission (Dolby digital sound/AC3),
you must connect your audio-digital receiver to the optical or coaxial output of
the receiver.
For the optical output, you need a light wave conductor cable, also called as
"optical cable".
For the coaxial audio output of the receiver, you need a
Cinch cable.
Caution!
Never connect the Phono input of your stereo system to the receiver; it
may damage your stereo system.
Strictly follow instructions for connecting the Cinch cable
given in the operating manual of your stereo system.
Caution!
Please follow strictly the information regarding connection in the
operating manual of your audio-digital receiver.

The optical and coaxial cables are not included in the scope of -
supply.

Your TV set does not need to be switched on for radio reception.