- 27 -
Initial start-up
Once you have connected the receiver, you can put it into operation. Switch
on by putting the ON/OF switch on the back in the ON position.
Use the (1) button on the remote control to switch the receiver on. The
basic installation will appear after a brief starting process.
Use the arrow keys up (12) and down (13) to move the blue bar to the menu
item which you would like to change.
You can terminate the basic installation at any time. You can do so
by using the Exit button (9) on the remote control.
OSD language:
You can use this menu item to change the language settings for the menu
displays.
Switch between the languages by pressing the arrow key right (10) or left
(11) on the remote control.
or
Press the OK (14) button on the remote control. A selection window opens
up. Use the arrow keys up (12) and down (13) to move the blue bar to
select the desired language.
Press the "OK" key (14) to confirm your selection.
To Next Page
Loading...
