- 42 -
Channel search
This menu item allows you to search all available channels or individual
transponders in case there are new changes.
Select satellite
Select the desired satellite here.
Press the arrow keys left (10) or right (11) to change the setting.
or
Press the “OK” key (14). A selection window appears.
Select the desired setting by using the arrow keys up (12) or down (13).
Confirm your selection by pressing the “OK” key (14).
Scan method
Select the scanning method here. If you select the "Auto" selection, all
available transponders are scanned. If the setting is "Channel", only the
transponder set under
"Edit/ select TP" is scanned.
Press the arrow keys left (10) or right (11) to change the setting.
or
Press the “OK” key (14). A selection window appears.
Select the desired setting by using the arrow keys up (12) or down (13).
Confirm your selection by pressing the “OK” key (14).
To Next Page
Loading...
