EasyManua.ls Logo

Silvercrest SL 80/2 100CI - Specifications

Silvercrest SL 80/2 100CI
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 93 -
Specifications
Receiver
Dimensions in mm (W × D × H)
350 × 265 × 70
Weight in grams Receiver 3040 g
Remote control 80 g (without batteries)
Range of input frequency 950 MHz ~ 2150 MHz
IF band width 55 MHz / 8 MHz (below 5 MS/s)
LNB power supply 13/18 GS, 0.30 A max.
Overload protection
LNB control 22 KHz ± 2 KHz, 0.6 V pp ± 0.2 V
DiSEqC control Version 1.0, Version 1.2, tone burst A/B
Symbol rate 2 ~ 35 MS/s
Input speed Max. 15 Mbit/s
Error correction (FEC) 1/2, 2/3, 3/4, 5/6, 7/8, auto
Aspect ratio 4:3 letterbox, 4:3 PanScan, 16:9
Video resolution 720 x 576 (Pal), 720 x 480 (NTSC)
Audio mode Left, right, stereo, AC3 digital sound
Connection options
2 x LNB IF-input Type F, IEC 169-24
2 x IF OUT-output Type F, IEC 169-24
TV SCART (output only)
Video, Audio L,R, CVBS, RGB, YUV (YPbPr)
VCR SCART (output and input) Video CVBS, Audio L, R
YPbPr component YPbPr
RCA (CINCH) Audio L,R, Video (CVBS)
COAXIAL, OPTICAL Digital audio output
RS 232 Serial port
S-VHS S-Video (Hosiden)
CI Common Interface
USB Mini-USB A/B Interface
Power supply
Input voltage power pack 100-240 V ~, 50/60 Hz
Power consumption approx. 20W (operation with Single
LNB)
approx. 2W (standby)
Operating temperature 0 ºC ~ +40 ºC
Storage temperature – 40 ºC ~ + 65 ºC
Humidity 5 % - 95 % (RH, non-condensing)

Table of Contents

Related product manuals