Use the SIG key (18) to switch the electronic beep tone on or off,
for acoustic indication of the reception strength. A tone will be
emitted only if a corresponding transponder is selected.
You can always go back one step in the menu by using the menu
key (8).
You can terminate the basic installation at any time. You can do so
by using the Exit button (9) on the remote control.
Select satellite
You can select one of the preset satellites here.
Press the arrow keys left (10) or right (11) to select one of the preset
satellites.
The following satellites have been preset by the manufacturer:
• ASTRA (19.2° East)
• Hotbird (13.0° East)
• Sirius (5.0° East)
• Hispasat 1C/1D (30.0°West)
• ASTRA 2 (28.2° East)
• Türksat 1C (42.0° East)
• Amos 1 (4.0° West)
To Next Page
Loading...
