- 33 -
Delete:
Mark the item "Select satellite" and press the OK key (14). A satellites list
editor opens up.
Select the desired satellite to be deleted by using the arrow keys left (10) or
right (11).
Press the red key (17).
Press the "OK" key (14) to confirm the input. Press the red key (17), if you
would like to interrupt the process and not delete the satellite.
Press the menu key (8) to save the settings and to return to the antenna
settings.
If you wish to enter the name, just as in a mobile phone, you can do so by
using the numeral/character input (3).
Use the input mode (ABC/Abc/abc/123) shown below.
Press the green key (18) to modify the input mode of the
character / numerical pad (3) (switching between ABC (only capitals), Abc
(1st letter in capital), abc (only small letters) or 123 (numerical input).
In the numerical mode, the capital and small letters spelling of the word
changes (see the example on the next page).
Now enter the desired letters or the desired figure by using the
corresponding key on the remote control.
To Next Page
Loading...
