- 47 -
Frequency
You can enter the desired frequency directly or change it in single steps.
Enter the frequency directly by using the numerical pad (3).
Confirm your input by pressing the “OK” key (14).
or
Press the arrow keys left (10) or right (11) to change the frequency by one
step (1 MHz) downwards (arrow key left (10)) or upwards (arrow key right
(11)).
Symbol rate
Enter the symbol rate directly through the numerical pad or use the arrow
keys to change the symbol rate by 100 steps.
Enter the symbol rate directly by using the numerical pad (3).
Confirm your input by pressing the “OK” key (14).
or
Press the arrow keys left (10) or right (11) to change the symbol rate by one
step (100 K Baud) downwards (arrow key left (10)) or upwards (arrow key
right (11)).
Polarization
Change the polarisation and select between horizontal or vertical.
Press the arrow keys left (10) or right (11) to change the polarisation.
Signal intensity
The signal intensity (strength) based on the reception strength is displayed
here graphically and numerically.
To Next Page
Loading...
