- 49 -
Add new TP
If the desired transponder is not entered in the list, you can add new
transponders.
Press the green key (18).
Enter the desired value in the item "Frequency". Please read further
information in the item "Frequency" given on the preceding pages.
Enter the desired value in the item "Symbol rate". Please read further
information in the item "Symbol rate" given on the preceding pages.
Enter the desired value in the item "Polarization". Please read further
information in the item "Polarization" given on the preceding pages.
Press the menu key (8) to save the settings. You go back one page in the
menu.
or
Press the Exit key (9) to reject the settings. You will exit the menu
completely.
To Next Page
Loading...
